En Technology
              Corporation
Our Products | audio | video | broadcast | shipping and warranty

AUDIO PRODUCTS

New! - OmniSnake Digital Audio Snake System:
The OmniSnake consists of a Stage Box that converts microphone/line-level analog inputs to a multiplexed digital signal, and a companion Base Unit that de-multiplexes to provide individual outputs. Digitizing the analog audio at the source eliminates the potential for ground loops, noise interference and crosstalk. Each Stage Box has 8 inputs, and two Stage Boxes can be linked together via coax to form a combined 16 channels, which is carried over coaxial cable to the Base Unit.
The Base Unit provides monitoring of each de-multiplexed audio level, plus gain switches to remotely control each of the microphone preamp gains. A single power supply provides power to all units via the coax cable, eliminating the need for external power on stage. Both analog and AES3 digital audio are available at the Base Unit for maximum flexibility. An AES3 reference input on the Base Unit locks the digital outputs to a common source. No more cumbersome multi-cable audio snakes. 16 channels of pristine digital audio, one 75-Ohm coaxial cable!!

FIND OUT MORE >>

Email to Place An Order

Ordering: 603-446-3700

AES/EBU Wizard
                              Pocket Audio MonitorAES/EBU Wizard Pocket Audio Monitor:
The AES/EBU Wizard is a hand-held digital audio monitor that receives AES/EBU audio at any sampling rate from 32kHz to 96kHz and displays the received sampling rate, lock status, and five different error conditions. It also has a headphone jack with volume control for monitoring digital audio sources. It is battery powered and includes an internal battery charger as well as an AC adapter for bench-top operation.

FIND OUT MORE >>

Email to Place An Order

Ordering: 603-446-3700

mAEStro Audio
                              Analog to Digital ConvertermAEStro Audio Analog to Digital Converter:
The mAEStro AADC-100 accepts balanced stereo analog audio inputs and converts them into a single digital bit stream in compliance with the AES/EBU (AES3) and S/PDIF digital audio standards. It generates 24-bit values and uses 128 times over-sampling for extremely accurate and linear analog to digital conversion, as well as offering a high dynamic range with exceptionally low total harmonic distortion and noise. The rugged self-contained metal enclosure has a number of mounting options from desktop, to rear side-rail rack mounting, to ganged front-side or rear-side rack mounting. This permits the unit to be mounted as close as possible to the audio source equipment while consuming a minimum of rack space.

FIND OUT MORE >>

Email to Place An Order

Ordering: 603-446-3700

mAEStro Audio
                                Digital to Analog ConvertermAEStro Audio Digital to Analog Converter:
The mAEStro ADAC-100 receives AES/EBU (AES3) or S/PDIF digital audio and converts it to two channels of analog audio. It automatically detects sample rates up to 96kHz with low-jitter clock recovery. Two balanced line-level audio outputs are provided on XLR connectors on the rear panel. For convenient monitoring, a stereo headphone mini-jack and volume control are provided on the front panel. The rugged self-contained metal enclosure has a number of mounting options from desktop, to rear side-rail rack mounting, to ganged front-side or rear-side rack mounting. This permits the unit to be mounted as close as possible to the audio source equipment while consuming a minimum of rack space.

FIND OUT MORE >>

Email to Place An Order

Ordering: 603-446-3700

mAEStro Digital
                                Audio Re-Clocking Distribution
                                AmplifiermAEStro Digital Audio Re-Clocking Distribution Amplifier:
The mAEStro ADA-100 receives AES/EBU (AES3) or S/PDIF digital audio and provides four re-clocked digital audio outputs. It automatically detects sample rates from 32kHz to 96kHz with low-jitter clock recovery. The outputs are completely regenerated using a jitter-free clock that is locked to the source input. The rugged self-contained metal enclosure has a number of mounting options from desktop, to rear side-rail rack mounting, to ganged front-side or rear-side rack mounting. This permits the unit to be mounted as close as possible to the audio source equipment while consuming a minimum of rack space

FIND OUT MORE >>

Email to Place An Order

Ordering: 603-446-3700

VIDEO PRODUCTS

SDI Pro VADC-100
                            Analog-to-Digital Video Converter/EmbedderSDI Pro VADC-100 Analog-to-Digital Video Converter/Embedder:

The SDI Pro VADC-100 converts composite analog video to SDI video and embeds two channels of analog audio.

Features
- NTSC/PAL or Betacam SP Analog Video Input
- 10-bit Video Analog-to-Digital Conversion
- 24-bit Audio Analog-to-Digital Conversion
- Extremely low distortion and crosstalk on audio channels
- 128X oversampling audio A-to-D for best performance
- 270 Mbps SDI output with 2-channel

FIND OUT MORE >>

Email to Place An Order

Ordering: 603-446-3700

SDI Pro VDAC-100
                            Digital-to-Analog Video
                            Converter/De-EmbedderSDI Pro VDAC-100 Digital-to-Analog Video Converter/De-Embedder

The SDI Pro VDAC-100 converts SDI video to composite analog video and
recovers two channels of embedded audio.

Features
- 270 Mbps SDI Input with 2-channel embedded audio.
- NTSC/PAL Analog Video Output
- 10-bit Video Digital-to-Analog Conversion
- 24-bit Audio Digital-to-Analog Conversion
- Extremely low distortion and crosstalk on audio channels
- Receive Lock & Audio Level front panel indicators.
- NTSC/PAL Analog Video Output
- Betacam SP Video Output
- 2-Channel Analog Audio Outputs

FIND OUT MORE >>

Ordering: 603-446-3700

DATA BROADCASTING

Cybercast VBI Data System
Transporting data on an analog video signal has never been easier than with En Technology's Cybercast data broadcasting system. Simply connect a video source to the data encoder along with a data stream from any serial port. The data is inserted onto the VBI portion of the video and sent across any transmission medium suitable for analog video. Decoders are available with direct video inputs or with TV tuners for receiving the video/data from an off-air broadcast source. The whole process is transparent to the serial data stream with baud rates up to 115,200 bps, depending on the number of VBI lines used.

Cybercast VDI
                              2000S VBI Data InserterCybercast System VDI 2000S VBI Data Inserter:
The VDI-2000S Video Data Inserter accepts data in either RS-232 or RS-422 serial format, then inserts the data onto an NTSC/PAL composite analog video signal. It can encode any of the standard VBI data formats plus the super-robust EnXpress(tm) format at data rates from 4800 baud to 115,200 baud. The rugged self-contained metal enclosure has a number of mounting options from desktop, to rear side-rail rack mounting, to ganged front-side or rear-side rack mounting.

FIND OUT MORE >>

Email to Place An Order

Ordering: 603-446-3700

Cybercast TVM
                                2000STCybercast System TVM 2000ST:
This portable data receiver decodes all standard VBI data formats plus the super robust EnXpress format at data rates from 4800 Baud to 115,200 Baud. The TVModem is rack mountable or stand-alone and features a compact, rugged enclosure for portable environments.

FIND OUT MORE >>

Email to Place An Order

Ordering: 603-446-3700


© 2023 En Technology. All rights reserved.

web design and web hosting by svend design